DTRConcentratorMIB DEFINITIONS::=BEGIN-- From file: "dtrc.mib"
-- Compile options "T M"-- IMPORTS (for SNMPv2)
-- enterprises, Counter32, Integer32, TimeTicks
-- FROM SNMPv2-SMI-v1
-- OBJECT-TYPE
-- FROM RFC-1212
-- DisplayString, RowStatus, MacAddress
-- FROM SNMPv2-TC-v1
-- InterfaceIndex
-- FROM IF-MIB
-- IANAifType
-- FROM IANAifType-MIB;IMPORTSenterprises,Counter,TimeTicksFROM RFC1155-SMI
OBJECT-TYPEFROM RFC-1212
DisplayStringFROM RFC1213-MIB;-- OBJECT-TYPE
-- FROM RFC-1212;-- SNMPv1 Textual ConventionsCounter32::=Counter
Integer32::=INTEGERRowStatus::=INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}
MacAddress::=OCTETSTRING(SIZE(6))InterfaceIndex::=Integer32IANAifType::=INTEGER{other(1),regular1822(2),hdh1822(3),ddnX25(4),rfc877x25(5),ethernetCsmacd(6),iso88023Csmacd(7),iso88024TokenBus(8),
iso88025TokenRing(9),iso88026Man(10),starLan(11),proteon10Mbit(12),proteon80Mbit(13),hyperchannel(14),fddi(15),lapb(16),sdlc(17),ds1(18),e1(19),basicISDN(20),primaryISDN(21),
propPointToPointSerial(22),ppp(23),softwareLoopback(24),eon(25),ethernet3Mbit(26),nsip(27),slip(28),ultra(29),ds3(30),sip(31),frameRelay(32),rs232(33),para(34),
arcnet(35),arcnetPlus(36),atm(37),miox25(38),sonet(39),x25ple(40),iso88022llc(41),localTalk(42),smdsDxi(43),frameRelayService(44),v35(45),hssi(46),
hippi(47),modem(48),aal5(49),sonetPath(50),sonetVT(51),smdsIcip(52),propVirtual(53),propMultiplexor(54)}cisco OBJECTIDENTIFIER::={ enterprises 9}--PSIM catProd OBJECT IDENTIFIER ::= { cisco 1 }ciscoProducts OBJECTIDENTIFIER::={ cisco 1}
--PSIM cat2600 OBJECT IDENTIFIER ::= { catProd 111 }cat2600 OBJECTIDENTIFIER::={ ciscoProducts 111}cat2600Ts OBJECTIDENTIFIER::={ cat2600 1}dtrMIBs OBJECTIDENTIFIER::={ cat2600Ts 3}dtrConcMIB OBJECTIDENTIFIER::={ dtrMIBs 1}dtrConcMIBObjects OBJECTIDENTIFIER::={ dtrConcMIB 1}dtrConcMIBBase OBJECTIDENTIFIER::={ dtrConcMIBObjects 1}
dtrConcMIBSpTree OBJECTIDENTIFIER::={ dtrConcMIBObjects 2}dtrConcMIBForwarding OBJECTIDENTIFIER::={ dtrConcMIBObjects 3}dtrConcMIBMRI OBJECTIDENTIFIER::={ dtrConcMIBObjects 4}dtrConcMIBStats OBJECTIDENTIFIER::={ dtrConcMIBObjects 5}-- MODULE-IDENTITY
-- LastUpdated
-- 9602131200Z
-- OrgName
-- Cisco
-- Descr
-- The MIB Module for DTR Concentrators.BridgeId::=OCTETSTRING(SIZE(8))
-- TEXTUAL-CONVENTION
-- Status
-- mandatory
-- Descr
-- The bridge identifier used in the spanning tree and defined in
-- ISO/IEC 10038:1993, clause 4.DynamicFdbStatus ::=INTEGER{other(1),invalid(2),learned(3),self(4),mgmt(5)}-- TEXTUAL-CONVENTION
-- Status
-- mandatory
-- Descr
-- Status of an entry in the CRF Filtering Database. Other (1)
-- indicates that some other MIB object is being used to determine
-- how/if the frame is forwarded. Invalid(2) indicates this entry
-- is no longer valid, but has not been flushed from the table.
-- Learned(3) indicates that dtrFdbDynamicAddrPortNumber for this
-- entry was learned. Self(4) indicates dtrFdbDynamicAddrStnAddress
-- represents one of the CRF Port Addresses. Mgmt(5) indicates
-- dtrFdbDynamicAddrStnAddress is also a value of an existing
-- DtrFdbStaticAddrStnAddressStaticFdbStatus ::=INTEGER{other(1),invalid(2),permanent(3),deleteOnReset(4)}-- TEXTUAL-CONVENTION
-- Status
-- mandatory
-- Descr
-- Status of an entry in the CRF Filtering Database. Other(1) indicates
-- this entry is currently in use under conditions different from the
-- available status definitions that follow. Invalid(2) indicates this
-- entry is no longer valid, but has not been flushed from the table.
-- Writing this value to the object removes the entry. Permanent(3)
-- indicates that the entry is currently in use and will remain so after
-- the next reset. DeleteOnReset(4) indicates the entry is currently in
-- use and will remain so until the next reset.PortId ::=OCTETSTRING(SIZE(2))-- TEXTUAL-CONVENTION
-- Status
-- mandatory
-- Descr
-- The port identifier used in the spanning tree protocol.RouteDescriptor ::=OCTETSTRING(SIZE(3))-- TEXTUAL-CONVENTION
-- Status
-- mandatory
-- Descr
-- The Route Descriptor (RD) consists of 2 parts; a 4 bit Bridge Number
-- and a 12 bit LAN ID. This identifies a bridge (BN) that has a port
-- on the local LAN and a port connected to the indicated LAN ID. This
-- object consists of 3 octets. The first octet contains the BN in the 4
-- least significant bits. The second octet contains the most significant
-- octet of the LAN ID. and the final octet contains the least significant
-- 4 bits of the LAN ID in the 4 most significant bits of the octet.Timeout::=INTEGER(0..65535)
-- TEXTUAL-CONVENTION
-- Status
-- mandatory
-- Descr
-- timer in 1/100 of secdtrConcentratorAddress OBJECT-TYPESYNTAXMacAddress-- Rsyntax OCTET STRING(SIZE(6))ACCESSread-onlySTATUSmandatoryDESCRIPTION" MAC address used by DTR Concentrator for uniqueness. It must
be unique "::={ dtrConcMIBBase 1}dtrOperNumberOfCrfs OBJECT-TYPESYNTAXINTEGER(1..255)ACCESSread-writeSTATUSmandatoryDESCRIPTION
" Number of Concentrator Relay Functions within the DTR
Concentrator. Min value is 1. Writing this object sets the number
of CRFs within the DTR Concentrator. "::={ dtrConcMIBBase 2}dtrOperNumberOfBridgeRelays OBJECT-TYPESYNTAXINTEGER(0 | 1)ACCESSread-writeSTATUSmandatoryDESCRIPTION" Number of bridge relay functions within the DTR Concentrator.
Value of 0 or 1 is permitted. Writing this object sets the number of bridge
relay functions within the DTR Concentrator. "::={ dtrConcMIBBase 3}dtrCRFTable OBJECT-TYPESYNTAXSEQUENCEOF DtrCRFEntry
ACCESSnot-accessible
STATUSmandatoryDESCRIPTION" This table contains information for each concentrator relay
function in the DTR Concentrator."::={ dtrConcMIBBase 6}dtrCRFEntry OBJECT-TYPESYNTAX DtrCRFEntry
ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION" "INDEX{ dtrCRFIndex }::={ dtrCRFTable 1}
DtrCRFEntry ::=SEQUENCE{
dtrCRFIndex INTEGER,
dtrCRFNumberOfPorts INTEGER,
dtrCRFPortMask OCTETSTRING,
dtrCRFName DisplayString,
dtrCRFMaxInfo INTEGER,
dtrCRFMacAddress MacAddress,
dtrCRFLocalLanId INTEGER,
dtrCRFFdbAgingTime INTEGER,
dtrCRFMRIEnable INTEGER,
dtrCRFLearnedEntryDiscards Counter32}dtrCRFIndex OBJECT-TYPESYNTAXINTEGER(1..255)ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION" The CRF number identifying this instance of CRF "::={ dtrCRFEntry 1}dtrCRFNumberOfPorts OBJECT-TYPESYNTAXINTEGER(1..255)
ACCESSread-onlySTATUSmandatoryDESCRIPTION" The number of CRF Ports controlled by this CRF "::={ dtrCRFEntry 2}dtrCRFPortMask OBJECT-TYPESYNTAXOCTETSTRINGACCESSread-writeSTATUSmandatoryDESCRIPTION" The set of interfaces (ifIndex) that are associated
with this instance of a CRF.
Each Octet within the value of this object specifies a set
of eight interfaces, with the first octet specifying
interfaces (ifIndex) 1 through 8, the second octet specifying
interfaces 9 through 16 and so on. Within each octet, the
most significant bit represents the lowest numbered interface,
and the least significant bit represents the highest numbered
interface.
Writing this variable will modify the CRF configuration and update
the value contained in dtrCRFNumberOfPorts."::={ dtrCRFEntry 3}dtrCRFName OBJECT-TYPESYNTAXDisplayString-- Rsyntax OCTET STRING(SIZE(0..255))ACCESSread-onlySTATUSmandatoryDESCRIPTION" The textual name of the CRF. The value of this obje should be the
name of the CRF as assigned by the DTR Concentrator and should
be suitable for use in commands entered at the DTR Concentrator 'console'"::={ dtrCRFEntry 4}dtrCRFMaxInfo OBJECT-TYPESYNTAXINTEGER(1500..18200)ACCESSread-onlySTATUSmandatory
DESCRIPTION" The maximum size of the INFO field that the CRF can
transmit/receive "::={ dtrCRFEntry 5}dtrCRFMacAddress OBJECT-TYPESYNTAXMacAddress-- Rsyntax OCTET STRING(SIZE(6))ACCESSread-onlySTATUSmandatoryDESCRIPTION" The MAC address ised with the dtrCRFSpTreePriority to form
the CRF Identifier used in the spanning tree protocol. This
address must be unique and it is recommended that this
address be the specific MAC address of the lowest numbered
C-Port. "::={ dtrCRFEntry 6}dtrCRFLocalLanId OBJECT-TYPESYNTAXINTEGER(0..65535)
ACCESSread-writeSTATUSmandatoryDESCRIPTION" This is the value of the local lan id used by the CRF. This value
may be assigned or may be learned by the CRF learning process.
Valid values range from 0 to 4095. Values outside this range
indicate that the lan id value has not been assigned or learned."::={ dtrCRFEntry 7}dtrCRFFdbAgingTime OBJECT-TYPESYNTAXINTEGER(10..1000000)ACCESSread-writeSTATUSmandatoryDESCRIPTION" The timeout period in seconds for aging out dynamic entries from
the Filtering Database. Recommended default is 300 seconds. "DEFVAL{300}
::={ dtrCRFEntry 8}dtrCRFMRIEnable OBJECT-TYPESYNTAXINTEGER{enable(1),disable(2)}ACCESSread-writeSTATUSmandatoryDESCRIPTION" This object enables/disables the MRI function in the CRF "::={ dtrCRFEntry 9}dtrCRFLearnedEntryDiscards OBJECT-TYPESYNTAXCounter32ACCESSread-onlySTATUSmandatoryDESCRIPTION" The total number of CRF Filtering Database entries, which
have been or would have been learned, but have been discarded
due to a lack of space to store them in the Filtering
Database "::={ dtrCRFEntry 10}dtrCRFPortTable OBJECT-TYPESYNTAXSEQUENCEOF DtrCRFPortEntry
ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION" This table contains information for each CRF Port in a Concentrator
Relay Function "::={ dtrConcMIBBase 7}dtrCRFPortEntry OBJECT-TYPESYNTAX DtrCRFPortEntry
ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION" "INDEX{ dtrCRFPortCRFIndex, dtrCRFPortNumber }
::={ dtrCRFPortTable 1}
DtrCRFPortEntry ::=SEQUENCE{
dtrCRFPortCRFIndex INTEGER,
dtrCRFPortNumber INTEGER,
dtrCRFPortEnable INTEGER,
dtrCRFPortifIndex InterfaceIndex,
dtrCRFOperPortType IANAifType,
dtrCRFPortMtuExceededDiscards Counter32,
dtrCRFPortDelayExceededDiscards Counter32}dtrCRFPortCRFIndex OBJECT-TYPESYNTAXINTEGER(1..255)ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION" The CRF number identifying an instance of CRF "::={ dtrCRFPortEntry 1}
dtrCRFPortNumber OBJECT-TYPESYNTAXINTEGER(1..255)ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION" The CRF Port number for which this entry contains CRF
management information."::={ dtrCRFPortEntry 2}dtrCRFPortifIndex OBJECT-TYPESYNTAXInterfaceIndex-- Rsyntax Integer32ACCESSread-writeSTATUSmandatoryDESCRIPTION" A unique value, greater than zero that corresponds to the
interface this CRF Port is assigned (corresponds to ifIndex).
Writing this object defines the correspondence between the
CRF Port and the interface (C-Port or bridge relay function
interface as determined by dtrCRFOperPortType.)"::={ dtrCRFPortEntry 3}dtrCRFPortEnable OBJECT-TYPESYNTAXINTEGER{enable(1),disable(2)}ACCESSread-writeSTATUSmandatoryDESCRIPTION" The enable/disable status of the CRF Port. This control can be
used to disable a port."::={ dtrCRFPortEntry 4}dtrCRFOperPortType OBJECT-TYPESYNTAXIANAifType-- Rsyntax INTEGER {
-- other(1),
-- regular1822(2),
-- hdh1822(3),
-- ddnX25(4),
-- rfc877x25(5),
-- ethernetCsmacd(6),
-- iso88023Csmacd(7),
-- iso88024TokenBus(8),
-- iso88025TokenRing(9),
-- iso88026Man(10),
-- starLan(11),
-- proteon10Mbit(12),
-- proteon80Mbit(13),
-- hyperchannel(14),
-- fddi(15),
-- lapb(16),
-- sdlc(17),
-- ds1(18),
-- e1(19),
-- basicISDN(20),
-- primaryISDN(21),
-- propPointToPointSerial(22),
-- ppp(23),
-- softwareLoopback(24),
-- eon(25),
-- ethernet3Mbit(26),
-- nsip(27),
-- slip(28),
-- ultra(29),
-- ds3(30),
-- sip(31),
-- frameRelay(32),
-- rs232(33),
-- para(34),
-- arcnet(35),
-- arcnetPlus(36),
-- atm(37),
-- miox25(38),
-- sonet(39),
-- x25ple(40),
-- iso88022llc(41),
-- localTalk(42),
-- smdsDxi(43),
-- frameRelayService(44),
-- v35(45),
-- hssi(46),
-- hippi(47),
-- modem(48),
-- aal5(49),
-- sonetPath(50),
-- sonetVT(51),
-- smdsIcip(52),
-- propVirtual(53),
-- propMultiplexor(54)
-- }ACCESSread-only
STATUSmandatoryDESCRIPTION" Indicates the type of interface that this CRF Port is assigned to.
Only two types are permitted, a C-Port and an interal bridge
relay function.
Write this object to set the type of interface."::={ dtrCRFPortEntry 5}dtrCRFPortMtuExceededDiscards OBJECT-TYPESYNTAXCounter32ACCESSread-onlySTATUSmandatoryDESCRIPTION" The number of frames discarded by the CRF Port due to excessive
size (exceeds CrfMaxInfo) "::={ dtrCRFPortEntry 6}dtrCRFPortDelayExceededDiscards OBJECT-TYPESYNTAXCounter32ACCESSread-onlySTATUSmandatory
DESCRIPTION" The number of frames discarded by the CRF Port due to excessive
delay through the CRF "::={ dtrCRFPortEntry 7}dtrSpanningTreeHoldTime OBJECT-TYPESYNTAXInteger32ACCESSread-onlySTATUSmandatoryDESCRIPTION"The minimum time period, in seconds, elapsing between the
transmission of Configuration PDUs through a given port (CRFP
or internal bridge). This is a fixed parameter of the DTR
Concentrator used by all member CRF and bridge entities. Value
specified by 802.1d is 1 second "::={ dtrConcMIBSpTree 1}dtrSpanningTreeProtocolSpecification OBJECT-TYPESYNTAXINTEGER{unknown(1),
ieee8021d(3)}ACCESSread-onlySTATUSmandatoryDESCRIPTION" An indication of what version of the Spanning Tree Protocol is
being run on the DTR Concentrator "::={ dtrConcMIBSpTree 2}dtrSpanningTreeTimeSinceTopoChange OBJECT-TYPESYNTAXTimeTicksACCESSread-onlySTATUSmandatoryDESCRIPTION" The time (in 1/100ths of a second) since the last topology
change was detected by the CRF or bridge entities within the
DTR Concentrator. "::={ dtrConcMIBSpTree 3}dtrSpanningTreeTopologyChanges OBJECT-TYPE
SYNTAXCounter32ACCESSread-onlySTATUSmandatoryDESCRIPTION" The total number of topology changes detected by this
concentrator since the management entity was last reset or
initialized "::={ dtrConcMIBSpTree 4}dtrSpanningTreeBridgeForwardDelay OBJECT-TYPESYNTAXTimeout(400..3000)-- Rsyntax INTEGER(400..3000)ACCESSread-writeSTATUSmandatoryDESCRIPTION" The value of the Forward Delay parameter when the entity (CRF or
bridge) is the Root or is attempting to become the Root. The
granularity of this timer is 1 second. "::={ dtrConcMIBSpTree 5}
dtrSpanningTreeBridgeHelloTime OBJECT-TYPESYNTAXTimeout(100..1000)-- Rsyntax INTEGER(100..1000)ACCESSread-writeSTATUSmandatoryDESCRIPTION" The value of the Hello Time parameter when the entity (CRF or
Bridge) is the Root or attempting to become the Root. The time
interval between transmissions of Topology Change Notification
PDUs. The granularity of this timer is 1 second. "::={ dtrConcMIBSpTree 6}dtrSpanningTreeTreeBridgeMaxAge OBJECT-TYPESYNTAXINTEGER(600..4000)ACCESSread-write
STATUSmandatoryDESCRIPTION" The value of the Max Age parameter when the entity (CRF or
bridge) is the Root or is attempting to become the Root.
The granularity of this timer is 1 second. "::={ dtrConcMIBSpTree 7}dtrCRFSpTreeTable OBJECT-TYPESYNTAXSEQUENCEOF DtrCRFSpTreeEntry
ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION"This table contains the spanning tree information for each CRF."::={ dtrConcMIBSpTree 9}dtrCRFSpTreeEntry OBJECT-TYPESYNTAX DtrCRFSpTreeEntry
ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION
" "INDEX{ dtrCRFSpTreeCRFIndex }::={ dtrCRFSpTreeTable 1}
DtrCRFSpTreeEntry ::=SEQUENCE{
dtrCRFSpTreeCRFIndex INTEGER,
dtrCRFSpTreePriority INTEGER,
dtrCRFSpTreeDesignatedRoot BridgeId,
dtrCRFSpTreeRootCost Integer32,
dtrCRFSpTreeRootPort Integer32,
dtrCRFSpTreeMaxAge Timeout,
dtrCRFSpTreeHelloTime Timeout,
dtrCRFSpTreeForwardDelay Timeout}dtrCRFSpTreeCRFIndex OBJECT-TYPESYNTAXINTEGER(1..255)ACCESSnot-accessible
STATUSmandatoryDESCRIPTION" The CRF number identifying this instance of CRF "::={ dtrCRFSpTreeEntry 1}dtrCRFSpTreePriority OBJECT-TYPESYNTAXINTEGER(0..65535)ACCESSread-writeSTATUSmandatoryDESCRIPTION" The value of the write-able portion of the CRF Identifier and the
first two octets of the CRF Identifier. The last 6 octets of the
CRF ID are given by the value of dtrCRFMacAddress. "::={ dtrCRFSpTreeEntry 2}dtrCRFSpTreeDesignatedRoot OBJECT-TYPESYNTAXBridgeId-- Rsyntax OCTET STRING(SIZE(8))
ACCESSread-onlySTATUSmandatoryDESCRIPTION" The bridge identifier of the root of the spanning tree as
determined by the spanning tree protocol executed at this node "::={ dtrCRFSpTreeEntry 3}dtrCRFSpTreeRootCost OBJECT-TYPESYNTAXInteger32ACCESSread-onlySTATUSmandatoryDESCRIPTION" The cost of the path to the root as seen from this CRF "::={ dtrCRFSpTreeEntry 4}dtrCRFSpTreeRootPort OBJECT-TYPESYNTAXInteger32ACCESSread-onlySTATUSmandatoryDESCRIPTION" The CRF Port number of the CRF Port which offers the lowest cost
path from this CRF to the root "::={ dtrCRFSpTreeEntry 5}dtrCRFSpTreeMaxAge OBJECT-TYPESYNTAXTimeout-- Rsyntax INTEGER(0..65535)ACCESSread-onlySTATUSmandatoryDESCRIPTION" The maximum age of Spanning Tree Protocol information learned
from the network on any port (CRF or bridge within the DTR
Concentrator) before it is discarded. Units are in 1/100th of
a second. This is the actual value currently in use"::={ dtrCRFSpTreeEntry 6}dtrCRFSpTreeHelloTime OBJECT-TYPESYNTAXTimeout-- Rsyntax INTEGER(0..65535)ACCESSread-onlySTATUSmandatory
DESCRIPTION" The amount of time between transmission of Configuration bridge
PDUs used by a CRF that is attempting to become the Root or is
the Root. This is the value currently in use "::={ dtrCRFSpTreeEntry 7}dtrCRFSpTreeForwardDelay OBJECT-TYPESYNTAXTimeout-- Rsyntax INTEGER(0..65535)ACCESSread-onlySTATUSmandatoryDESCRIPTION" This time value, measured in 1/100th of a second, is used to
control the amount of time spent in the Listening state when
moving from the Blocking state to the Listening state and the
amount of time in the Learning state when moving from the
Learning state to the Forwarding state. This time value is used
for ageing dynamic entries in the Filtering Database while the
Topology Change flag is set in protocol messages received from
the root. This is the value the CRF is currently using "
::={ dtrCRFSpTreeEntry 8}dtrCRFPortSpTreeTable OBJECT-TYPESYNTAXSEQUENCEOF DtrCRFPortSpTreeEntry
ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION"This table contains spanning tree information for each CRF Port."::={ dtrConcMIBSpTree 10}dtrCRFPortSpTreeEntry OBJECT-TYPESYNTAX DtrCRFPortSpTreeEntry
ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION" "INDEX{ dtrCRFPortSpTreeCRFIndex, dtrCRFPortSpTreeNumber }::={ dtrCRFPortSpTreeTable 1}
DtrCRFPortSpTreeEntry ::=SEQUENCE{
dtrCRFPortSpTreeCRFIndex INTEGER,
dtrCRFPortSpTreeNumber INTEGER,
dtrCRFPortSpTreePriority INTEGER,
dtrCRFPortSpTreeState INTEGER,
dtrCRFPortSpTreePathCost INTEGER,
dtrCRFPortSpTreeDesignatedRoot BridgeId,
dtrCRFPortSpTreeDesignatedCost Integer32,
dtrCRFPortSpTreeDesignatedBridge BridgeId,
dtrCRFPortSpTreeDesignatedPort PortId,
dtrCRFPortSpTreeForwardTransitions Counter32}dtrCRFPortSpTreeCRFIndex OBJECT-TYPESYNTAXINTEGER(1..255)ACCESSnot-accessible
STATUSmandatoryDESCRIPTION" The CRF number identifying this instance of CRF "::={ dtrCRFPortSpTreeEntry 1}dtrCRFPortSpTreeNumber OBJECT-TYPESYNTAXINTEGER(1..255)ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION"The CRF Port number for which this entry contains CRF
management information."::={ dtrCRFPortSpTreeEntry 2}dtrCRFPortSpTreePriority OBJECT-TYPESYNTAXINTEGER(0..255)ACCESSread-write
STATUSmandatoryDESCRIPTION" The value of the priority field which is contained in the
first byte of the CRF Port Identifier. The second byte of
the CRF Port Identifier is given by the value of CRF Port as
identified by dtrCRFPortSpTreeNumber"::={ dtrCRFPortSpTreeEntry 3}dtrCRFPortSpTreeState OBJECT-TYPESYNTAXINTEGER{disabled(1),blocking(2),listening(3),learning(4),forwarding(5),broken(6)
}ACCESSread-onlySTATUSmandatoryDESCRIPTION" The CRF Port state as defined by the Spanning Tree. If the DTR
concentrator detects that a port is malfunctioning, it will place
that port into the broken(6) state. the states are defined as:
disabled(1), blocking(2), listening(3), learning(4), forwarding(5),
and broken(6). "::={ dtrCRFPortSpTreeEntry 4}dtrCRFPortSpTreePathCost OBJECT-TYPESYNTAXINTEGER(1..65535)ACCESSread-writeSTATUSmandatoryDESCRIPTION" The contribution of the path through this CRF Port,
identified by dtrCRFPortSpTreeNumber when the CRF Port is the
Root Port, to the total cost of the path to the Root for this
CRF "::={ dtrCRFPortSpTreeEntry 5}dtrCRFPortSpTreeDesignatedRoot OBJECT-TYPESYNTAXBridgeId-- Rsyntax OCTET STRING(SIZE(8))ACCESSread-onlySTATUSmandatoryDESCRIPTION" The unique bridge identifier of the bridge recorded as the Root
in the root identifier parameter of the Configuration PDUs
transmitted by the designated bridge for the LAN to which the
CRF Port is attached. "::={ dtrCRFPortSpTreeEntry 6}dtrCRFPortSpTreeDesignatedCost OBJECT-TYPESYNTAXInteger32ACCESSread-onlySTATUSmandatoryDESCRIPTION" The cost of the path to the Root offered by the Designated Port
on the LAN to which this CRF Port is attached "::={ dtrCRFPortSpTreeEntry 7}dtrCRFPortSpTreeDesignatedBridge OBJECT-TYPESYNTAXBridgeId-- Rsyntax OCTET STRING(SIZE(8))ACCESSread-onlySTATUSmandatoryDESCRIPTION" The unique Bridge or CRF Identifier of the Bridge or CRF believed to be the
Designated Bridge for the LAN associated with the CRF Port "::={ dtrCRFPortSpTreeEntry 8}dtrCRFPortSpTreeDesignatedPort OBJECT-TYPESYNTAX PortId
-- Rsyntax OCTET STRING(SIZE(2))ACCESSread-onlySTATUSmandatoryDESCRIPTION" The Port Identifier of the Bridge or CRF port believed to be the
Designated Port for the LAN associated with the CRF Port "::={ dtrCRFPortSpTreeEntry 9}dtrCRFPortSpTreeForwardTransitions OBJECT-TYPESYNTAXCounter32ACCESSread-onlySTATUSmandatoryDESCRIPTION" The number of times this CRF Port, as identified by
dtrCRFPortSpTreeNumber, has transitioned from the Learning
state to the Forwarding State "::={ dtrCRFPortSpTreeEntry 10}dtrFdbDynamicAddrTable OBJECT-TYPESYNTAXSEQUENCEOF DtrFdbDynamicAddrEntry
ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION"This table contains information about specific dynamic MAC address
entries in the CRF Filtering Database."::={ dtrConcMIBForwarding 1}dtrFdbDynamicAddrEntry OBJECT-TYPESYNTAX DtrFdbDynamicAddrEntry
ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION" CRF Filtering Database Dynamic MAC address entry"INDEX{ dtrFdbDynamicAddrCRFIndex, dtrFdbDynamicAddrStnAddress }::={ dtrFdbDynamicAddrTable 1}
DtrFdbDynamicAddrEntry ::=SEQUENCE{
dtrFdbDynamicAddrCRFIndex INTEGER,
dtrFdbDynamicAddrStnAddress MacAddress,
dtrFdbDynamicAddrPortNumber INTEGER,
dtrFdbDynamicAddrStatus DynamicFdbStatus
}dtrFdbDynamicAddrCRFIndex OBJECT-TYPE
SYNTAXINTEGER(1..255)ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION" The CRF number identifying this instance of CRF "::={ dtrFdbDynamicAddrEntry 1}dtrFdbDynamicAddrStnAddress OBJECT-TYPESYNTAXMacAddress-- Rsyntax OCTET STRING(SIZE(6))ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION" A unicast MAC address for which the CRF has forwarding
information. This object is updated by the Learning Process in
the CRF."::={ dtrFdbDynamicAddrEntry 2}
dtrFdbDynamicAddrPortNumber OBJECT-TYPESYNTAXINTEGER(1..255)ACCESSread-onlySTATUSmandatoryDESCRIPTION" The CRF Port number of the CRF Port that a frame with an
address matching dtrFdbDynamicAddrStnAddress in this
dtrFdbDynamicAddrTable Entry has been seen. A value of zero
is assigned when dtrFdbDynamicAddrStnAddress is known, but
the CRF Port number (dtrFdbDynamicAddrPortNumber) has not
been learned."::={ dtrFdbDynamicAddrEntry 3}dtrFdbDynamicAddrStatus OBJECT-TYPESYNTAX DynamicFdbStatus
-- Rsyntax INTEGER {
-- other(1),
-- invalid(2),
-- learned(3),
-- self(4),
-- mgmt(5)
-- }ACCESSread-onlySTATUSmandatory
DESCRIPTION" Status of this entry. Other (1) indicates that some other
MIB object is being used to determine how/if the frame is
forwarded. Invalid(2) indicates this entry is no longer
valid, but has not been flushed from the table. Learned(3)
indicates that dtrFdbDynamicAddrPortNumber for this entry was
learned. Self(4) indicates dtrFdbDynamicAddrStnAddress
represents one of the CRF Port Addresses. Mgmt(5) indicates
dtrFdbDynamicAddrStnAddress is also a value of an existing
dtrFdbStaticAddrStnAddress"::={ dtrFdbDynamicAddrEntry 4}dtrFdbStaticAddrTable OBJECT-TYPESYNTAXSEQUENCEOF DtrFdbStaticAddrEntry
ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION"This table contains information about specific static MAC address
entries in the CRF Filtering Database. "
::={ dtrConcMIBForwarding 2}dtrFdbStaticAddrEntry OBJECT-TYPESYNTAX DtrFdbStaticAddrEntry
ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION" CRF Filtering Database Static MAC Address Entry "INDEX{ dtrFdbStaticAddrCRFIndex, dtrFdbStaticAddrStnAddress }::={ dtrFdbStaticAddrTable 1}
DtrFdbStaticAddrEntry ::=SEQUENCE{
dtrFdbStaticAddrCRFIndex INTEGER,
dtrFdbStaticAddrStnAddress MacAddress,
dtrFdbStaticAddrRowStatus RowStatus,
dtrFdbStaticAddrInMask OCTETSTRING,
dtrFdbStaticAddrOutMask OCTETSTRING,
dtrFdbStaticAddrStatus StaticFdbStatus
}dtrFdbStaticAddrCRFIndex OBJECT-TYPESYNTAXINTEGER(1..255)ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION" The CRF number identifying this instance of CRF "::={ dtrFdbStaticAddrEntry 1}dtrFdbStaticAddrStnAddress OBJECT-TYPESYNTAXMacAddress-- Rsyntax OCTET STRING(SIZE(6))ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION" The MAC address for this entry. It may include group or broadcast
addresses."::={ dtrFdbStaticAddrEntry 2}
dtrFdbStaticAddrRowStatus OBJECT-TYPESYNTAXRowStatus-- Rsyntax INTEGER {
-- active(1),
-- notInService(2),
-- notReady(3),
-- createAndGo(4),
-- createAndWait(5),
-- destroy(6)
-- }ACCESSread-writeSTATUSmandatoryDESCRIPTION" Allows creation and deletion of static entries. "::={ dtrFdbStaticAddrEntry 3}dtrFdbStaticAddrInMask OBJECT-TYPESYNTAXOCTETSTRINGACCESSread-writeSTATUSmandatoryDESCRIPTION" The set of CRF Ports which receive frames with a
destination address matching the address specified by the
DtrFdbStaticAddrStnAddress in this entry that may forward
this frame to any output CRF Port indicated by
DtrFdbStaticAddrOutMask. Each octet within the value of this
object specifies a set of eight ports, with the first octet
specifying CRF Ports 1 through 8, the second octet specifying
CRF Ports 9 through 16 and so on. Within each octet, the
most significant bit represents the lowest numbered port,
and the least significant bit represents the highest numbered
port. "::={ dtrFdbStaticAddrEntry 4}dtrFdbStaticAddrOutMask OBJECT-TYPESYNTAXOCTETSTRINGACCESSread-writeSTATUSmandatoryDESCRIPTION" The set of CRF Ports to which frames with a destination
address matching the address specified by the
DtrFdbStaticAddrStnAddress in this entry may be forwarded to.
Each octet within the value of this object specifies a set of
eight ports, with the first octet specifying CRF Ports 1
through 8, the second octet specifying CRF Ports 9 through 16
and so on. Within each octet, the most significant bit
represents the lowest numbered port, and the least
significant bit represents the highest numbered port."::={ dtrFdbStaticAddrEntry 5}dtrFdbStaticAddrStatus OBJECT-TYPESYNTAX StaticFdbStatus
-- Rsyntax INTEGER {
-- other(1),
-- invalid(2),
-- permanent(3),
-- deleteOnReset(4)
-- }ACCESSread-onlySTATUSmandatoryDESCRIPTION" Status of this entry. Other(1) indicates this entry is currently
in use under conditions different from the available status
definitions that follow. Invalid(2) indicates this entry is no
longer valid, but has not been flushed from the table. Writing
this value to the object removes the entry. Permanent(3) indicates
that the entry is currently in use and will remain so after the
next reset. DeleteOnReset(4) indicates the entry is currently in
use and will remain so until the next reset. "::={ dtrFdbStaticAddrEntry 6}dtrFdbDynamicRDTable OBJECT-TYPESYNTAXSEQUENCEOF DtrFdbDynamicRDEntry
ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION"This table contains information about a specific dynamic route
descriptor entry in the CRF Filtering Database. "::={ dtrConcMIBForwarding 3}dtrFdbDynamicRDEntry OBJECT-TYPESYNTAX DtrFdbDynamicRDEntry
ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION" "INDEX{ dtrFdbDynamicRDCRFIndex, dtrFdbDynamicRDRouteDesc }
::={ dtrFdbDynamicRDTable 1}
DtrFdbDynamicRDEntry ::=SEQUENCE{
dtrFdbDynamicRDCRFIndex INTEGER,
dtrFdbDynamicRDRouteDesc RouteDescriptor,
dtrFdbDynamicRDPortNumber INTEGER,
dtrFdbDynamicRDStatus DynamicFdbStatus
}dtrFdbDynamicRDCRFIndex OBJECT-TYPESYNTAXINTEGER(1..255)ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION" The CRF number identifying this instance of CRF "::={ dtrFdbDynamicRDEntry 1}dtrFdbDynamicRDRouteDesc OBJECT-TYPE
SYNTAX RouteDescriptor
-- Rsyntax OCTET STRING(SIZE(3))ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION" A Route Descriptor for which the CRF has forwarding
information. The Route Descriptor (RD) consists of 2 parts; a 4
bit Bridge Number and a 12 bit LAN ID. This identifies a bridge
(BN) that has a port on the local LAN and a port connected to the
indicated LAN ID. This object consists of 3 octets. The first
octet contains the BN in the 4 least significant bits. The
second octet contains the most significant octet of the LAN ID
and the final octet contains the least significant 4 bits of the
LAN ID in the 4 most significant bits of the octet. "::={ dtrFdbDynamicRDEntry 2}dtrFdbDynamicRDPortNumber OBJECT-TYPESYNTAXINTEGER(1..255)
ACCESSread-onlySTATUSmandatoryDESCRIPTION" The CRF Port number of the CRF Port that a frame with a
Route Descriptor matching dtrFdbDynamicRDRouteDesc in this
DtrFdbDynamicRDEntry has been seen. A value of zero is
assigned when dtrFdbDynamicRDRouteDesc is known, but the CRF
Port number has not been learned "::={ dtrFdbDynamicRDEntry 3}dtrFdbDynamicRDStatus OBJECT-TYPESYNTAX DynamicFdbStatus
-- Rsyntax INTEGER {
-- other(1),
-- invalid(2),
-- learned(3),
-- self(4),
-- mgmt(5)
-- }ACCESSread-onlySTATUSmandatoryDESCRIPTION"Status of this entry. Other (1) indicates that some other
MIB object is being used to determine how/if the frame is
forwarded. Invalid (2) indicates this entry is no longer
valid, but has not been flushed from the table. Learned (3)
indicates that dtrFdbDynamicRDPortNumber for this entry was
learned. Self(4) indicates dtrFdbDynamicRDRouteDesc
represents a relay across the Bridge relay function of this
DTR Concentrator. Mgmt(5) indicates dtrFdbDynamicRDRouteDesc
is also a value of an existing dtrFdbStaticRDRouteDesc in the
dtrFdbStaticRDTable."::={ dtrFdbDynamicRDEntry 4}dtrFdbStaticRDTable OBJECT-TYPESYNTAXSEQUENCEOF DtrFdbStaticRDEntry
ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION"A table containing information about specific static route
descriptor entries in the CRF Filtering Database."::={ dtrConcMIBForwarding 5}dtrFdbStaticRDEntry OBJECT-TYPE
SYNTAX DtrFdbStaticRDEntry
ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION" "INDEX{ dtrFdbStaticRDCRFIndex, dtrFdbStaticRDRouteDesc }::={ dtrFdbStaticRDTable 1}
DtrFdbStaticRDEntry ::=SEQUENCE{
dtrFdbStaticRDCRFIndex INTEGER,
dtrFdbStaticRDRouteDesc RouteDescriptor,
dtrFdbStaticRDRowStatus RowStatus,
dtrFdbStaticRDPortNumber INTEGER,
dtrFdbStaticRDStatus StaticFdbStatus
}dtrFdbStaticRDCRFIndex OBJECT-TYPESYNTAXINTEGER(1..255)ACCESSnot-accessible
STATUSmandatoryDESCRIPTION" The CRF number identifying this instance of CRF "::={ dtrFdbStaticRDEntry 1}dtrFdbStaticRDRouteDesc OBJECT-TYPESYNTAX RouteDescriptor
-- Rsyntax OCTET STRING(SIZE(3))ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION" Static Entries contain route descriptor information for
internal Bridge Ports. These entries are added as part of the
initialization of the DTR Concentrator when an internal bridge
relay function is enabled (dtrOperNumberOfBridgeRelays=1)
The Route Descriptor (RD) consists of 2 parts; a
4 bit Bridge Number and a 12 bit LAN ID. This identifies a
bridge (BN) that has a port on the local LAN and a port
connected to the indicated LAN ID. This object consists of 3
octets. The first octet contains the BN in the 4 least
significant bits. The second octet contains the most
significant octet of the LAN ID and the final octet contains
the least significant 4 bits of the LAN ID in the 4 most
significant bits of the octet. "::={ dtrFdbStaticRDEntry 2}dtrFdbStaticRDRowStatus OBJECT-TYPESYNTAXRowStatus-- Rsyntax INTEGER {
-- active(1),
-- notInService(2),
-- notReady(3),
-- createAndGo(4),
-- createAndWait(5),
-- destroy(6)
-- }ACCESSread-writeSTATUSmandatoryDESCRIPTION"Allows creation and deletion of static entries"::={ dtrFdbStaticRDEntry 3}dtrFdbStaticRDPortNumber OBJECT-TYPESYNTAXINTEGER(1..255)
ACCESSread-writeSTATUSmandatoryDESCRIPTION" The CRF Port number of the CRF Port that a frame with a
Route Descriptor matching dtrFdbStaticRDRouteDesc in this
DtrFdbStaticRDEntry is forwarded to."::={ dtrFdbStaticRDEntry 4}dtrFdbStaticRDStatus OBJECT-TYPESYNTAX StaticFdbStatus
-- Rsyntax INTEGER {
-- other(1),
-- invalid(2),
-- permanent(3),
-- deleteOnReset(4)
-- }ACCESSread-writeSTATUSmandatoryDESCRIPTION"Status of this entry. Other (1) indicates this entry is currently
in use under conditions different from the available status
definitions that follow. Invalid(2) indicates this entry is no
longer valid, but has not been flushed from the table. Writing
this value to the object removes the entry. Permanent (3) indicates
that the entry is currently in use and will remain so after the next
reset. DeleteOnReset(4) indicates the entry is currently in use and
will remain so until the next reset."::={ dtrFdbStaticRDEntry 5}dtrMRITable OBJECT-TYPESYNTAXSEQUENCEOF DtrMRIEntry
ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION"This table contains information about the CRF port out
mask for specific management functions. "::={ dtrConcMIBMRI 1}dtrMRIEntry OBJECT-TYPESYNTAX DtrMRIEntry
ACCESSnot-accessibleSTATUSmandatory
DESCRIPTION" "INDEX{ dtrMRICRFIndex, dtrMRIMgmtType }::={ dtrMRITable 1}
DtrMRIEntry ::=SEQUENCE{
dtrMRICRFIndex INTEGER,
dtrMRIMgmtType INTEGER,
dtrMRIOutMask OCTETSTRING}dtrMRICRFIndex OBJECT-TYPESYNTAXINTEGER(1..255)ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION" The CRF number identifying this instance of CRF "::={ dtrMRIEntry 1}
dtrMRIMgmtType OBJECT-TYPESYNTAXINTEGER(0..15)ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION" Identifies the function class for this entry. The MRI
forwards frames with a destination class equal to
dtrMRIMgmtType using the corresponding mask entry
(dtrMRIOutMask). When the destination class is 0 and the
source class is not 0, the destination address in the MAC
frame is used to forward the frame. MAC frames with a
destination class not found in this table are not forwarded
by the MRI."::={ dtrMRIEntry 2}dtrMRIOutMask OBJECT-TYPESYNTAXOCTETSTRINGACCESSread-writeSTATUSmandatory
DESCRIPTION" The set of CRF Ports to which frames with a destination
class matching the function class specified by the
dtrMRIMgmtType in this entry may be forwarded to. Each octet
within the value of this object specifies a set of eight
ports, with the first octet specifying CRF Ports 1 through 8,
the second octet specifying CRF Ports 9 through 16 and so on.
Within each octet, the most significant bit represents the
lowest numbered port, and the least significant bit
represents the highest numbered port. "::={ dtrMRIEntry 3}dtrCRFPortStatsTable OBJECT-TYPESYNTAXSEQUENCEOF DtrCRFPortStatsEntry
ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION" This table contains the counters for each CRF Port."::={ dtrConcMIBStats 1}
dtrCRFPortStatsEntry OBJECT-TYPESYNTAX DtrCRFPortStatsEntry
ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION" "INDEX{ dtrCRFPortStatsCRFIndex, dtrCRFPortStatsPortNumber }::={ dtrCRFPortStatsTable 1}
DtrCRFPortStatsEntry ::=SEQUENCE{
dtrCRFPortStatsCRFIndex INTEGER,
dtrCRFPortStatsPortNumber INTEGER,
dtrCRFPortStatsAreInFrames Counter32,
dtrCRFPortStatsAreOutFrames Counter32,
dtrCRFPortStatsInFrames Counter32,
dtrCRFPortStatsOutFrames Counter32,
dtrCRFPortStatsSrfInFrames Counter32,
dtrCRFPortStatsSrfOutFrames Counter32,
dtrCRFPortStatsSteInFrames Counter32,
dtrCRFPortStatsSteOutFrames Counter32,
dtrCRFPortStatsInvalidRI Counter32,
dtrCRFPortStatsInMisdirected Counter32,
dtrCRFPortStatsInDiscards Counter32}dtrCRFPortStatsCRFIndex OBJECT-TYPESYNTAXINTEGER(1..255)ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION" The CRF number identifying this instance of CRF "::={ dtrCRFPortStatsEntry 1}dtrCRFPortStatsPortNumber OBJECT-TYPE
SYNTAXINTEGER(1..255)ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION" The CRF Port number for which this entry contains CRF
management information. When the dtrCrfOperPortType
indicates a C-Port, the C-Port number is found in
dtrCRFPortConfigCPort."::={ dtrCRFPortStatsEntry 2}dtrCRFPortStatsAreInFrames OBJECT-TYPESYNTAXCounter32ACCESSread-onlySTATUSmandatoryDESCRIPTION" The number of ARE frames received at this CRF Port. This
count does not include ARE frames that have been misdirected
(final Lan Id does not match the local Lan Id maintained by
the CRF (dtrCRFLocalLanId))"
::={ dtrCRFPortStatsEntry 3}dtrCRFPortStatsAreOutFrames OBJECT-TYPESYNTAXCounter32ACCESSread-onlySTATUSmandatoryDESCRIPTION" The number of ARE frames transmitted by this CRF Port.
This count does not include ARE frames that have been
misdirected (final Lan Id does not match the Local Lan Id
maintained by the CRF (dtrCRFLocalLanId)) "::={ dtrCRFPortStatsEntry 4}dtrCRFPortStatsInFrames OBJECT-TYPESYNTAXCounter32ACCESSread-onlySTATUSmandatoryDESCRIPTION" The number of valid frames received by this CRF Port "::={ dtrCRFPortStatsEntry 5}
dtrCRFPortStatsOutFrames OBJECT-TYPESYNTAXCounter32ACCESSread-onlySTATUSmandatoryDESCRIPTION" The number of frames that have been transmitted by this
CRF Port. "::={ dtrCRFPortStatsEntry 6}dtrCRFPortStatsSrfInFrames OBJECT-TYPESYNTAXCounter32ACCESSread-onlySTATUSmandatoryDESCRIPTION" The number of SRF frames that have been received by this
CRF Port and forwarded to another port on the CRF."::={ dtrCRFPortStatsEntry 7}dtrCRFPortStatsSrfOutFrames OBJECT-TYPESYNTAXCounter32
ACCESSread-onlySTATUSmandatoryDESCRIPTION" The number of SRF frames that have been transmitted by this
CRF Port."::={ dtrCRFPortStatsEntry 8}dtrCRFPortStatsSteInFrames OBJECT-TYPESYNTAXCounter32ACCESSread-onlySTATUSmandatoryDESCRIPTION" The number of STE frames received at this CRF Port. This
count does not include STE frames that have been misdirected
(final Lan Id does not match the local Lan Id maintained by
the CRF (dtrCRFLocalLanId)). "::={ dtrCRFPortStatsEntry 9}dtrCRFPortStatsSteOutFrames OBJECT-TYPESYNTAXCounter32
ACCESSread-onlySTATUSmandatoryDESCRIPTION" The number of STE frames transmitted by this CRF Port.
This count does not include STE frames that have been
misdirected (final Lan Id does not match the local Lan Id
maintained by the CRF (dtrCRFLocalLanId)). "::={ dtrCRFPortStatsEntry 10}dtrCRFPortStatsInvalidRI OBJECT-TYPESYNTAXCounter32ACCESSread-onlySTATUSmandatoryDESCRIPTION" Count of frames that were discarded due to a formatting error (i.e.
an odd RI length, or 0 RI length) (Reference 802.1d C4.2.1.1.3) "::={ dtrCRFPortStatsEntry 11}dtrCRFPortStatsInMisdirected OBJECT-TYPESYNTAXCounter32
ACCESSread-onlySTATUSmandatoryDESCRIPTION" This is a count of source routed frames that have been
received at this CRF Port where the local Lan Id
(dtrCRFLocalLanId) is not present or is not last (explorer
frame). Explorer frames (ARE and STE) are broadcast to all
Forwarding CRF Ports. SRF frames are discarded if the DA is
specific and they are broadcast if the DA is multicast. "::={ dtrCRFPortStatsEntry 12}dtrCRFPortStatsInDiscards OBJECT-TYPESYNTAXCounter32ACCESSread-onlySTATUSmandatoryDESCRIPTION" The number of frames that have been discarded by the Forwarding
Process. This count may include frames that are discarded by the
Frame Reception process "::={ dtrCRFPortStatsEntry 13}
END